Setup Screens
Buttons & Screens
The Home Screen
CONFIGURATION
DISPLAY
INPUT 1
INPUT 1
INPUT 2
INPUT 2
SOURCE
SOURCE
SYSTEM
INPUT 1+2
100%
Figure 3: The Home Screen at Startup
Figure 3 illustrates the Home screen. From the Home screen you
can configure Input 1 and 2, the Source (signal output) and System
parameters, which include flashlight brightness, speaker volume,
display back light, and Real Time Clock (RTC). You only need to
touch the screen buttons to make choices. When first powering on
the 940A, it should display a startup message, as seen on page i,
and then display the home screen, as seen above.
7
Summary of Contents for 940A
Page 10: ...x ...
