Arbiter Systems 928A, User Manual, Page: 24 / 120

Measurement Terminals
The Model 928A has two identical sets of measurement
terminals, called Channel A and Channel B, that ac-
cept either a voltage or a current. To measure a cur-
rent, select one of the current input connectors at the
top of the instrument. To measure a voltage, select a
set of voltage terminals found below the current input
connectors.
Caution: Maximum Input, Current Terminals: 0 to
1.2 Arms or 0 to 1.2 Vrms. See caution for CT probe
use on page 4 .
Versatile Inputs
For basic measurements (voltage, current, frequency
and phase angle) any combination of inputs may be
used.
For power and energy measurements (active
power, apparent power, reactive power or power fac-
tor), use a combination of voltage and current inputs.
10