manualshive.com logo in svg

araknis AN-100-AP-I-N, Product Manual

Share
Download
araknis AN-100-AP-I-N Product Manual Download Page 56

© 2016 Araknis Networks

®

56

Araknis Networks Wireless Access Point

Product Manual

Traceroute Test

-Return to Table of Contents-

19 - Traceroute Test

The Traceroute Test screen can be used to display the route and delays for data packets to/from a 
destination on an IP network. 

Figure 47. 

Traceroute Test 

Path – 

Maintenance, Traceroute

Parameters – 

•  Target IP / Domain Name –

 Enter the IP address of a device or web page to show the path of 

communication to that device or website.

•  Start –

 Click the Start button to start Traceroute. Traceroute Test results will be displayed in the 

text frame.

•  Stop –

 Click the Stop button to stop Traceroute.

Configuration Instructions – 

 

1.  Click 

Maintenance, Traceroute

.

2.  Specify the traceroute test settings.

3.  Click 

Start

.

4.  Click 

Stop

 to end the test.

Summary of Contents for AN-100-AP-I-N





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands