6
To replace, position the shield on the base plate so that the lower part of
the sliding slot of the shield is over the spring clip of the base plate and
the brass stud is in the red hole of the base plate
⑦
. Press the shield
onto the spring clip, and then fully raise the shield until the brass stud
falls into the sliding slot of the base plate
⑧&⑨
.
Position top hook on the backside of the side pod into the top tab of base
plate
⑩
, align the side pod with the recess of the helmet shell and push
the lower part of the side pod down firmly until it clicks into place and is
fully captured by the base plate
⑪
. Repeat for the other side. Work the
shield up and down to confirm proper operation
⑫
.
To remove, place shield in the fully open position
①
. Push the side
pod
release lever from the front edge of the side pod backward
②
to release the
side pod
③
.
Then lower the shield until the brass stud of the shield moves into the red hole
of the base plate
④
. Remove the shield from the spring clips
⑤＆⑥
, and
repeat for the other side.
TO OPERATE AIRFLOW SPOILER
To deploy the spoiler in the down position, simply pull
it down by grasping the center of its chin curtain.
To retract, simply push it up with the heel of your
hand.
TO REMOVE/REPLACE SHIELD
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
