English
WARNING:
Never use petrol, thinner, benzene or any other solvents.
To replace the fabric covering, ensure it is turned right side out, and stretch
the covering over the rear edge of the cheekpad assembly. Then push the
rectangular collar through the pad assembly and place it in position. Stretch the
rest of the covering over the front part of the cheekpad assembly making sure
to leave the tab outside the fabric covering. Adjust the covering to lie smoothly.
To replace cheekpad in helmet, slip pad onto strap. Then place the tab at
the front into the slot on the helmet side. Push the rear part of pad until the
pad is fully home. Pull the chinstrap to check possible chinstrap play in the
cheekpad.
