ARAG Skipper 467031, Installation Manual

Page: 9 / 24

9
• Securing the antenna:
If the surface to which the antenna is to be mounted is metal or steel, use the provided magnetic
plate: the magnet is equipped with a threaded shaft to which the antenna can be installed by
screwing it fully down (Fig. 9).
Make sure that the antenna is mounted to a perfectly flat metal surface, free of any
surface treatment capable of reducing the strength of the magnet itself.
Fig. 9 Fig. 10
If the magnetic mount is not secure enough, screw the mounting shaft directly onto the chassis of
the machine as shown in Fig. 11; drill a hole in the chassis and mount the shaft with an M10 nut.
5/8”UNC
M10
Fig. 11
The operator is responsible for checking that the mounting system is completely
secure. ARAG is not liable for damage of any nature caused by the antenna working
free, independently of which mounting system is used.