ARAG Skipper 467031, Installation Manual

Page: 10 / 24

10
4.7 Electrical connections - general diagram
A
F
4 m
0,5 m
3 m
6 m
+ -
3 A
D
C
E
B
WIRE COLOR
(POWER CABLE)
RESPECTIVE
CONNECTION
Black Negative
Red Positive
Green Treatment status signal
Fig. 12
a
Satellite navigator
B
GPS antenna and receiver
c
Battery
d
Automotive fuse - 3 A
e
Treatment status 12 Vdc (from main control valve)
f
BRAVO 300S computer
4.8 Connection to the GPS receiver
Only use ARAG receiver especially designed for SKIPPER. ARAG is not responsible
for any damages caused by the use of non-authorized receivers.
Before making the connection, carefully read par. 4.3 - General precautions for loca-
ting the SKIPPER and cable runs.
Connect the GPS receiver to the guidance monitor with cable
6
in Fig. 1 (chapter 3 - Contents of
the package).
The connection points are given in par. 4.7 - Electrical connections - general diagram.