background image

GUARANTEE TERmS

 

1.  ARAG s.r.l. guarantees this apparatus for a period of 360 day (1 year) from the date of sale to the client user (date of the 

goods delivery note).

  The components of the apparatus, that in the unappealable opinion of ARAG are faulty due to an original defect in the 

material or production process, will be repaired or replaced free of charge at the nearest Assistance Centre operating 
at the moment the request for intervention is made. The following costs are excluded:

-  disassembly and reassembly of the apparatus from the original system;
-  transport of the apparatus to the Assistance Centre.
2.  The following are not covered by the guarantee:
-  damage caused by transport (scratches, dints and similar);
-  damage due to incorrect installation or to faults originating from insufficient or inadequate characteristics of the electri-

cal system, or to alterations resulting from environmental, climatic or other conditions;

-  damage due to the use of unsuitable chemical products, for spraying, watering, weedkilling or any other crop tre-

atment, that may damage the apparatus;

-  malfunctioning caused by negligence, mishandling, lack of know how, repairs or modifications carried out by unautho-

rised personnel;

-  incorrect installation and regulation;
-  damage or malfunction caused by the lack of ordinary maintenance, such as cleaning of filters, nozzles, etc.;
-  anything that can be considered to be normal wear and tear.
3.  Repairing the apparatus will be carried out within time limits compatible with the organisational needs of the Assistan-

ce Centre.

  No guarantee conditions will be recognised for those units or components that have not been previously washed and 

cleaned to remove residue of the products used.

4.  Repairs carried out under guarantee are guaranteed for one year (360 days) from the replacement or repair date.
5.  ARAG will not recognise any further expressed or intended guarantees, apart from those listed here.
  No representative or retailer is authorised to take on any other responsibility relative to ARAG products.
  The period of the guarantees recognised by law, including the commercial guarantees and allowances for special pur-

poses are limited, in length of time, to the validities given here. In no case will ARAG recognise loss of profits, either 
direct, indirect, special or subsequent to any damage.

6.  The parts replaced under guarantee remain the property of ARAG.
7.  All safety information present in the sales documents regarding limits in use, performance and product characteristics 

must be transferred to the end user as a responsibility of the purchaser.

8.  Any controversy must be presented to the Reggio Emilia Law Court.

Summary of Contents for DigiWOLF 4627 Series

























Reviews: