background image

13

10 

END-OF-LIFE DISPOSAL

This device contains a lithium polymer battery that, at end of life, must be disposed of according to the prevailing rules.

Should it be necessary to replace the battery, do not disassemble the device but contact ARAG directly.

The device must be used and stored at the temperature indicated in chapter "Technical data" of this manual.

Excessive temperature oscillations may cause acid leakage, overheating, explosion or self-combustion of the battery and 
consequent injuries and/or damages to persons.
Do not open, remove, drill or throw the device in the fire.
In case of battery leakage and accidental contact with the leaked out fluids, thoroughly rinse the concerned area and seek 
immediately medical advice.

11 

GUARANTEE TERMS

 

1.  ARAG s.r.l. guarantees this apparatus for a period of 360 days (1 year) from the date of sale to the client user (date of the goods delivery 

note).

 

The components of the apparatus, that in the unappealable opinion of ARAG are faulty due to an original defect in the material or 
production process, will be repaired or replaced free of charge at the nearest Assistance Center operating at the moment the request for 
intervention is made. The following costs are excluded:

-  disassembly and reassembly of the apparatus from the original system;
-  transport of the apparatus to the Assistance Center.
2.  The following are not covered by the guarantee:
-  damage caused by transport (scratches, dents and similar);
-  damage due to incorrect installation or to faults originating from insufficient or inadequate characteristics of the electrical system, or to 

alterations resulting from environmental, climatic or other conditions;

-  damage due to the use of unsuitable chemical products, for spraying, watering, weedkilling or any other crop treatment, that may damage 

the apparatus;

-  malfunctioning caused by negligence, mishandling, lack of know how, repairs or modifications carried out by unauthorized personnel;
-  incorrect installation and regulation;
-  damage or malfunction caused by the lack of ordinary maintenance, such as cleaning of filters, nozzles, etc.;
-  anything that can be considered to be normal wear and tear.
3.  Repairing the apparatus will be carried out within time limits compatible with the organizational needs of the Assistance Center.
 

No guarantee conditions will be recognized for those units or components that have not been previously washed and cleaned to remove 
residue of the products used;

4.  Repairs carried out under guarantee are guaranteed for one year (360 days) from the replacement or repair date.
5.  ARAG will not recognize any further expressed or intended guarantees, apart from those listed here.
 

No representative or retailer is authorized to take on any other responsibility relative to ARAG products.

 

The period of the guarantees recognized by law, including the commercial guarantees and allowances for special purposes are limited, in 
length of time, to the validities given here. 

 

In no case will ARAG recognize loss of profits, either direct, indirect, special or subsequent to any damage.

6.  The parts replaced under guarantee remain the property of ARAG.
7.  All safety information present in the sales documents regarding limits in use, performance and product characteristics must be transferred 

to the end user as a responsibility of the purchaser.

8.  Any controversy must be presented to the Reggio Emilia Law Court.

12 

EU CONFORMITY DECLARATION

The declaration of conformity is available at www.aragnet.com, in the relevant section.

Summary of Contents for Bravo 400S LT















Reviews: