5
4
contents of the Packaging
5 installation
5.1 Precautions
When installing the foam marker it is necessary to observe a few essential rules:
•
When fixed, the compressor unit should be sheltered from sprayed products or stones which
can be thrown by tractor wheels.
•
On seeders, install the electric-compressor unit sheltered from areas that are too dusty.
•
Install the foam marker at bar ends using the supplied supports at a distance from the last
spraying nozzle equal to half the distance of one nozzle to the other (Fig. 3).
•
The foam must fall in an area sheltered from the nozzle and the point where it falls must mark
the area treated by the boom.
•
Fix the pipes of the pneumo-hydraulic system to the framework with clamps, in a position pro-
tected from possible impact with the ground or with the boom framework.
•
At the joints of the booms the pipes must be of
such a length as to allow the booms to open and
close without damaging the pipes.
•
Place the tank upright with the cap easily acces-
sible for filling and adjusting the flow rate.
•
Apply the tank so as to make it possible to be
removed for periodical washing.
•
The compressor cover should be easily removed
for maintenance operations.
1
Tank plug with max. pressure valve
2
Foaming liquid tank
3
Foam markers
4
Vertical foam marker brackets
5
Air-liquid connecting pipes
6
Control box
Fig. 3
7
Accessory/spare part kit
8
Instructions handbook
9
Tank holder basket
10
Compressor/solenoid valve unit
11
Complete harnesses
Fig. 2
