Start-up of the stove.
Connect the network cable to the socket on the back of the stove.
Then, the following graphic sequences (numbered to the left of the text) will be displayed on the
control panel screen.
1 - Software version and serial number.
2 -Selected stove model.
3 - Start test It will be done every time
reconnect the stove.
4 -Checking the air level in depression. In
this case must be equal to or greater than the
value
It is located on the right: .53mB.
/
5 -Screen without activity. Indicates that the stove
is ready to light. We press menu to see the
programming.
6 -Basic program. Modulation by fuel levels. No
control of ambient temperature or external
temperature.
Quick guide to show the operation of the stove with rise and fall of the power level. In menu 1 you will
find the way to program the stove by using a series of submenus which will optimize its performance.
7 - Ignition of stove. We press the on / off key.
8 -
The system is checking by checking
components and parameters.
4
