66 - We select time. This will allow us to program on
and off that will be done automatically.
67 - We enable time.
68 - We confirm habilitation.
.
69 - We left chrono.
70 - We select thermostat. This will allow us to keep
the ambient temperature stable and save our fuel.
71 - We enable thermostat.
72 - We confirm habilitation.
73 -We left thermostat.
74 - We select standby thermostat. The stove will
switch off if it exceeds 3ºC (air) or 7ºC (water) at
ambient temperature / setpoint boiler.
75 - We enable standby.
76 - We confirm habilitation.
77 - We left standby.
78 - We select fuel level programming.
79
-We enter fuel level programming.
12
