2-VISUALIZER
It informs us about the state of the boiler and reflects the actions we perform on the keyboard.
4-ON / OFF KEY
(
)
It allows us to turn on and off our boiler, and leave the programming fields within the different menus.
5-MENU KEY
This button allows us to select between the different functions of our boiler, hour, minute, day, boiler
temperature, on / off programs, etc., and select the data to be modified (the symbol appears *) .
6-DECREASE KEY
(
)
Reduces the temperature (fuel drop) generated by our boiler and allows you to select and vary the different
settings available in the configuration menus
5-INCREASE KEY
(
)
Increases the temperature (fuel drop) generated by our boiler and allows you to select and vary the different
settings available in the configuration menus
8-INFRARED RECEIVER
Receive the signal sent by the remote control. (
)(
)(
)
7-LED DIODE
indicates signal reception, coming from the remote control.
9-FLAT TAPE CONNECTOR
. Connect the keyboard with the UNICONTROL unit, using flat cable
10-USB CONNECTOR
. Connect the keyboard with the UNICONTROL unit, using a USB cable
LIGHTING THE KEYBOARD (ACTIVATE / DEACTIVATE)
:
The keyboard models Uni_Teclado_11 and later versions have a function, which allows us to deactivate the
backlight of the keyboard when it is not necessary.
To activate this function we must place ourselves in the main screen and press the menu key ( ) for five
seconds. At this time, the blue LED on the keypad will blink twice, indicating that the function has been
activated. After twenty seconds without any activity of the keyboard or remote control the lighting of the
display will turn off and will only be activated again if a key is pressed on the control panel (keypad) or on the
remote control.
To deactivate this function, press ( ) for five seconds and after them the backlight will be activated.
3
