AR 10051217, Operating And Service Manual

Page: 53 / 90

Model 2000S1G2z8
Rev A 29
2.8.3 Switch Breakout Board (A67)
2.8.3.1 Connector J9
Notes
Indicate a range representing a NO ACTION STATE (i.e. +1.2 Vdc << +2.3 Vdc)
Once activated, inputs are checked for all following control states
Guaranteed operation between 0.0 Vdc and +3.3Vdc (damage occurs outside this range)
Control
Line
Input Control States
Defined in section 4
Fault?

= Yes
General Description
Add fault description in section 6
Add non-fault description in section 7
Pwr OFF
RF OFF
Pwr ON
RF OFF
Pwr ON
RF ON
J9 – 1 Analog
J9 – 2 Analog
J9 – 3 Analog
J9 – 4 Analog
2.8.3.2 Connector J8
Notes These outputs are not state-driven (always on) and can be set to a fixed value in the range of 0.0 Vdc to 4.8 Vdc
Line Output Value
J8 – 1
Analog
J8 – 2 Ground
J8 – 3 Analog
J8 – 4 Ground