background image

 

Approved for public release by AR RF/Microwave Instrumentation 

061813

 

160 School House Road Souderton, PA 18964-9990 • 215-723-8181 • www.arworld.us 

Page 1 of 2

 

Model ATH18G40 

Antenna 

18GHz–40GHz 

 

The Model ATH18G40 is a wide band, high gain, high power microwave horn antenna. With a minimum gain 

of 15.2dB over isotropic, the Model ATH18G40 supplies the high intensity fields necessary for RFI/EMI field 
testing within and beyond the confines of a shielded room. The Model ATH18G40 is extremely compact and 
light weight for ready mobility, yet is built tough enough for the extra demands of outdoor use and easily 
mounts on a rigid waveguide by the waveguide flange. Part of a family of microwave frequency antennas, the 

Model ATH18G40 provides the 18-40GHz response required for many often used test specifications. 

 

The ATH18G40 can also be custom calibrated to the user’s requirement for use in RF emission testing. The 

calibrated model is designated by adding a ‘CC’ suffix to the model. Calibration details must be provided 
using Form 701. Contact factory for details. 

 

The export classification for this equipment is EAR99.  These commodities, technology or software are 
controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. 
law is prohibited. 

 

SPECIFICATIONS 

 

FREQUENCY RANGE .................................................... 18-40GHz 

 

POWER INPUT (maximum) ............................................ 450 watts CW 

 

2000 watts Peak 

 

POWER GAIN (over isotropic) ........................................ See  Graph 

 

VSWR 

 Maximum 

.............................................................. 

1.5:1 

 Average 

................................................................. 

1.3:1 

 

BEAM WIDTH (average) 
 E 

Plane 

.................................................................. See  Graph 

 

H Plane ................................................................. See Graph 

 

CONNECTOR .............................................................. WRD 180 C24 waveguide  

 

MOUNTING PROVISIONS ............................................. Waveguide  flange 

 

WEIGHT (maximum) ..................................................... 56.7 g (0.125 lbs) 

 

SIZE (WxHxD) ................................................................ 3.73 x 2.69 x 6.27 cm, (1.47 x 1.06 x 2.47 in) 

 

Summary of Contents for 10009545



























Reviews: