Page
3
of
5
Getting Started
Charge Batteries
1)
Plug the 18650 Battery Charger into a power source. The indicator light on charger will illuminate green.
2)
Insert an 18650 battery into charger being sure the positive side of battery (side with nipple) is inserted on the positive side of
the charger (indicated with + symbol).
3)
Indicator light on charger will turn red indicating the battery is charging.
4)
When indicator light turns green or begins to flicker green and red the battery is fully charged and should be removed from
charger immediately.
5)
Charging time for the 18650 battery will range between 3 – 6 hours.
6)
Never leave charging batteries unattended and always remove battery from charger immediately after charging is complete.
Assemble Device
1)
Your batteries come with a partial charge so you can use the 2nd battery to begin using your device while the 1st battery is
charging.
2)
Remove the End Cap from the MyGo tube.
3)
Insert the 18650 battery into the tube with the positive end of the battery inserted first then replace the end cap. The
negative end of the battery should be facing the end cap.
4)
Power on device
a.
For V1 hold down the power button for 5 seconds until the LCD screen illuminates
b.
For V2 press the power button simultaneously 5 times within 3 seconds and the LCD screen will illuminate.
5)
Installing atomization attachment
a.
510 atomizer and blank cartridge
Screw the 510 atomizer into the Accessory Fitting on tube top
Fill the 510 blank cartridge with liquid and insert the cartridge into the end of the 510 atomizer
b.
510 DCT
Fill the DCT tube with liquid (see our site for detailed instructions on filling the DCT)
Screw the DCT into Accessory Fitting on tube top
c.
Cartomizers
Fill the cartomizer with liquid (see our site for detailed instructions on filling cartomizer)
Screw the cartomizer into Accessory Fitting on tube top
d.
eGo Attachments
Screw the eGo adapter into Accessory Fitting on tube top
Fill the eGo assessor with liquid (see our site for detailed instructions on filling)
Screw the eGo accessory into eGo adapter that you screwed into Accessory Fitting
