Page
2
of
5
a.
To lock the voltage in on the device turn the device on, set the voltage, then turn the device off by pressing the
power button 5 times. Now press the power button 1 time and the device will operate at the voltage it was set to
before you turned it off but the display will not illuminate when you press the voltage or power buttons and the
voltage can’t be changed when in this mode. To turn the device back on completely with access to change the
voltage with display functional just press the power button 5 times.
9)
NEW
- Remaining battery charge is displayed by battery bar graphic on right of LCD screen.
10)
NEW
- Measure and display the resistance of the atomizer by pressing the power button 1 time. The atomizer ohm resistance
will display on the screen for 3 seconds.
11)
NEW
- Will hold up to a 67mm battery which means 18650 batteries with nipple and/or protection circuit will fit and end cap
will screw tightly closed as long as they are not longer than 67mm.
Getting to know your MyGo
Once you have determined the version you have using the information above and have read the above features you are ready to
prepare your device for the first use.
Use the below graphics to familiarize yourself with the components of the device as we’ll reference them several times in the
instructions.
