ISACQ240C(ENG)-0 Rev.301007-0
15 - 19
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: [email protected]
Settings Menu
BlackOut
The SMS module will send a message to the pre-set phone
numbers when there is a black-out.
The module will send another notification message when
the current returns.
Note
The Black-out function will be valid only if the
SMS module is active.
It is also recommended to disconnect the module from
the controller using the disable function before unplug-
ging its power supply unit. This is to prevent the module
from recognising the power failure as a black-out and from
consequently sending an alarm SMS.
Impostazioni
Centro Messaggi
Cambia PIN
(Fig. 21)
Aquatronica
FW version: x.y
Press a key
to continue
About
Provides information on the control unit’s firmware ver
-
sion.
AQUATRONICA:
Black out
From:
+39338******
SMS
(Fig. 18)
AQUATRONICA:
End of black out
From:
+39338******
SMS
(Fig. 19)
Controller monitoring
When connected to the control unit, the SMS module
verifies both its presence and its correct operation. If the
control unit does not operate correctly or has been acciden-
tally disconnected, the module will send an SMS with the
relevant error message (fig. 20). When normal operation
is reinstated, the module will send an SMS advising that
the problem has been resolved.
AQUATRONICA:
Attention: Controller
not operating or not
present
From:
+39338******
SMS
(Fig. 20)