ISACQ240C(ENG)-0 Rev.301007-0
12 - 19
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: [email protected]
1945
(Fig. 8)
Enter SIM PIN:
It becomes necessary to use this command if the SIM
inserted is protected by a safety code (PIN).
Entering this PIN using the
keys allows the SMS module
and the SIM card to communicate, even if it is protected.
Note: The purpose of this function is not to protect the user
from improper use of the module by third parties.
ATTENTION: Protection of the SIM card will be disabled
when the PIN code is entered so as to be allow the SMS
module to read it. Therefore, it will be necessary to re-en-
able the protection PIN by hand if the card is later used
on any mobile phone.
The SMS module accepts up to 3 PIN code entry attempts
at the most, after which the PUK unlocking code is re-
quested.
Settings Menu
Enter SIM PIN
(Fig.5)
PH
Redox
Temperature
Alarms
Alarms:
It lets you select one or more sensor families (Temperature,
pH, Redox, etc.) from the list of those that can be connected
to the controller, for which an SMS will be sent if an alarm
condition occurs (Fig. 6 and 7). To select the desired sen-
sor, you have to move using the
keys, whereas you
have to use the
keys in order to enable or disable the
alarm on the selected sensor (Fig.5).
Now press the “Enter” key and the settings entered will
be saved. On the contrary, you will return to the previously
saved settings and lose the latest modifications if you press
the “Esc” key.
AQUATRONICA:
Alarm
pH 8.50
From:
+39338******
SMS
(Fig. 6)
AQUATRONICA:
Alarm cancelled
pH 8.20
From:
+39338******
SMS
(Fig. 7)
Conductivity
Level