8 - 26
IsACQ455C-0 (ENG) Rev. 261108-0
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: [email protected]
Main menu
When you connect one or more Koralia Wave Modules
(max. 4) to the power unit, the Aquatronic controller
will automatically recognise the accessory without the
user having to do anything (Fig.1).
Proceed as follows to make any of the pump settings
(Fig.2):
Main screen page
Main menu
Dimmer
Pumps
Change name (Fig. 3)
It is used to change the name of the Koralia Wave
Module or of each individual pump connected to the
module.
Proceed as follows to change the name of the Koralia
Wave Module:
•
Select the “
change name
“ menu using the up/down
arrow keys
and press
“Enter”
(Fig.3).
•
Select the Koralia Wave Module on which you wish
to work using the up/down arrow keys
and press
“Enter”
(Fig.4).
•
Select the Dimmer pumps menu using the up/down
arrow keys
and press
“Enter”
(Fig.5).
•
Select the letter to be entered using the up/down
arrow keys
and use the right/left arrow keys
to move within the word; upon completion, press
“Enter”
.
Proceed as follows to change the name of the individual
Koralia pump:
•
Select the
“Single pumps”
menu using the up/down
arrow keys
and press
“Enter”
(Fig.5).
•
Select the pump to be renamed using the up/down
arrow keys
and press
“Enter”
(Fig.6).
•
Select the letter to be entered using the up/down
arrow keys
and use the right/left arrow keys
to move within the word; upon completion, press
“Enter”
.
Main menu
Sequences
(Fig. 2)
XY programs
Diary
Dimmer pumps
Dimmer pumps 1
(Fig. 4)
Dimmer pumps 2
Dimmer pumps 4
Dimmer pumps 3
New Device Connected
Dimmer Pumps
DP01
(Fig. 1)
Dimmer pumps
Temperature
Dimmer pumps
(Fig. 3)
Manual commands
About
Programs
Change name
Dimmer pumps
Change name
(Fig. 5)
Single pumps
Dimmer pumps
Single pumps
01 P1
(Fig. 6)
02 P2
04 P4
03 P3
