11 - 26
IsACQ455C-0 (ENG) Rev. 261108-0
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: [email protected]
Programs menu
Relation between the pump selected and the previous pump
Next:
•
The pump starts after the previous pump.
You need to set all the operating parameters (see points 3-4-5-6-7 on page 10).
Same:
•
The pump starts at the same time as the previous one.
You just need to define the minimum and maximum power of the pump because the
times defined in points 5-6-7 are the same as the previous pump.
Added:
•
The pump starts to reach its maximum power as soon the previous pump has
reached its maximum power. The pump reaches the minimum power set when the
previous pump starts to slow down. You need to define the minimum and maximum
power (points 3-4) and the Max. Time (point 6). The max. T must strictly be less than
that set for the previous pump.
Previous pump
Pump selected
Previous pump
Pump selected
Previous pump
Pump selected
