background image

Retain Warranty Certificate (upper portion) in a safe and convenient location for your records.

DETACH HERE: Fill out bottom portion completely and mail within 10 days of purchase/installation to:

▼   

AquaTools, Attn: Warranty Dept., 293 Wright St., Delavan, WI 53115 

Pumps, filters, skimmers, underwater lights (except bulbs),
accessories and fittings manufactured by AquaTools are
warranted to be free of defects in material and workman-
ship for one (1) year from date of installation.

Product specific warranties: 

Year from date 

of installation

Module Filters

– Tanks . . . . . . . . . . . . . . . . . . . . 10 years

Internal filter components and valves  . . . .  1 year 

Automatic Pool Cleaners including Hose

. . . . . .  2 years 

Sand Filters

– Tanks . . . . . . . . . . . . . . 10 years pro-rated* 

Valve and Internal components.. . . . . . . . . .  1 year

Above-ground Cartridge

– 

Filter Tank . . . . . . 5 years pro-rated (1st 2 years full) 
Elements . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 year

Sand Systems

– Tanks . . . . . . . . . . . . . 10 years pro-rated* 

Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 year
Valve and Internals . . . . . . . . . . . . . . . . . . .  1 year

Cartridge Systems

– Filter Tank . . . . . . . . . . . . . . . 1 year 

Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 year

Module Filter Systems 

– Tanks . . . . . . . . . . . . . . 10 years 

Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 year
Platform and Internals . . . . . . . . . . . . . . . . .  1 year

Pumps

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

1 year

When equipped with A.O. Smith 
2-compartment motors (Does not include
pumps sold as part of a systems package). .  2 years

The foregoing warranties relate to the original consumer
purchaser (“Purchaser”) only. AquaTools shall have the
option to repair or replace the defective product, at its sole 

discretion. Purchasers must pay all labor and shipping
charges necessary to replace the product covered by this
warranty. Requests for warranty service must be made
through the installing dealer. This warranty shall not apply
to any product that has been subject to negligence, misap-
plication, improper installation or maintenance, or other
circumstances which are not in AquaTools’ direct control.
* Full warranty coverage is in effect for one year after instal-
lation. The pro-rated warranty covers the 

tank only

during

the 2nd through 10th year after installation. The amount
covered decreases by 10% each year. (ie., 2nd year 90%
covered, 3rd year 80% covered, etc.).

This warranty sets forth AquaTools’ sole obligation and
Purchaser’s exclusive remedy for defective products.

AquaTools SHALL NOT BE LIABLE FOR ANY CONSEQUEN-
TIAL, INCIDENTAL OR CONTINGENT DAMAGES WHAT-
SOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND
BEYOND THE DURATION OF THE APPLICABLE EXPRESS
WARRANTIES PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of inci-
dental or consequential damages or limitations on how
long an implied warranty lasts, so the above limitations or
exclusion may not apply to you. This warranty gives you
specific legal rights and you may also have other rights
which vary from state to state.

Supersedes all previous publications.

AquaTools
293 Wright Street
Delavan, WI 53115

Warranty Registration Card

Name 

Address 

City State 

Zip 

Purchase Date 

Product Purchased 

New installation 

Replacement

Type of Pool

Inground 

Vinyl

Fiberglass

Gunite

Size of Pool 

Years pool has been in service    

less than 1    

1-3    

3-5    

5-10

Purchased from: 
Company name

Address 

City State 

Zip 

Please send me more information on these 

other products from AquaTools.

Pumps    

Filters   

Automatic Pool Cleaners

Maintenance Equipment    

Test Strips

S4877AT (Rev. 5/15/00)

AquaTools

®

LIMITED WARRANTY

Summary of Contents for AT5800













Reviews: