background image

F

OR

A

BOVEGROUND

P

OOLS

PLEASE READ THIS MANUAL CAREFULLY. YOUR ENJOYMENT OF YOUR SOLAR HEATED POOL
AND YOUR WARRANTY ARE AFFECTED BY HOW YOUR SOLAR HEATING SYSTEM IS INSTALLED

CAUTION:

a) Solar collectors are often installed on the roofs of buildings. Unless you are very familiar with working
on roofs and have the proper ladders and safety equipment for such work, you should hire someone with
the necessary experience to do the installation. Failure to observe safe practices on a roof or other elevated
structure may result in falling, leading to serious injury to you.

b) When installing collectors on the ground, do not build a rack support that could allow children access
into the pool.

How Solar Pool Heating Works

Why SunHeater

TM

Works Best

• Using your pool pump, water

is automatically pumped
through the solar collector.

• The water is then heated as it

moves through the collector.

• The heated water is returned

back to the pool, through
your return lines.

• You enjoy your own

heated pool with no
fuel costs!

• Water is heated as it moves through the many

tubes in the solar collectors.

• Tube and web design traps heat, catches light as

the sun moves across the sky.

• Tough polypropylene material won’t rust, corrode

or scale. Plus, the collector is reversible.

Collector Cross Section - Shown Actual Size

TM

INSTALLATION AND

OPERATION MANUAL

Summary of Contents for Sunheater









Reviews: