1
FITTING AND OPERATING
INSTRUCTIONS FOR FARHO HEATERS
WARNING
Please read these instructions carefully and keep them for future queries.
It is recommended that heaters are being installed and accredited by a qualified
electrician following Low Voltage Regulations. Any claim presented will be deemed
as invalid if the prevailing regulations have not been met.
GENERAL INFORMATION
Thank you for purchasing a Farho heater.
Farho, is a unique heating system designed, developed and produced by Farho based on a
heating conducting fluid with a very high heat inertia. Farho heaters put together a great
number of the advantages of existing heating systems such as the use of injected aluminum
and electricity as a source of energy easy to use and control and Farhoil, a patented fluid
elaborated just for Farho. Farho heaters are available in different types giving therefore
solutions for everyone.
Farho heaters have been designed and are manufactured in accordance with appliance
requirements pursuant to EN 60950, EN 300 220, EN 301 489, EN 60335-1 y EN 60335-
2-3 standards.
Correctly sized, the heater will provide sufficient heat to keep the space in which it has
been fitted warm in a very efficient way.
IMPORTANT:
Always disconnect the electricity supply from the power point before any
maintenance operations.
DO NOT COVER heater´s surface. Inflammable items must not be placed on the heaters.
Heaters should not be used to dry out clothes, towels… These items as well as other such
as spray cans and volatile substances or objects must be kept away at least 2cm from
the radiator.
