7
Flow of Water Decreases
& Slows.
Is the Pump inlet screen blocked or
clean ?
Are the impeller/s clean ?
The discharge pipe is not partially
clogged ?
Clean the area or areas in question.
If inlet screen is constantly getting
blocked you should flush your
Water Tank of sediment, sludge etc.
Low Flow or Insufficient
Pressure and different from
when the Pump was new.
Are you sure that the Pump Inlet is
not obstructed ?
Is / are the impellers clean ?
Are you sure that the outlet –
delivery pipe is not obstructed in
any way ?
Is the diameter of the discharge
pipe enough ?
Clean the zone (s) concerned and
verify check valve, if applicable
Connect a pipe with a suitable
diameter and suppress reduction of
the water passage
8. Certificate of Conformity
AQUATECH AUSTRALASIA Pty Ltd & AQUATICA Water Pumps :
Declares that following pumps:
AQSUB-SBIC1000 INOX MULTI; AQSUB-SBIC1200 INOX MULTI
• Are manufactured under strict Agreement and Quality Control in The P.R.C. -
… and Comply with the following directives
• Directive Base Tension 2006/95/EC
• Directive Compatibilité Électromagnétique 2004/108/EC
• Directive ROHS 2002/95/EC
Tests executed in accordance with following regulations:
1. EN55014-1 : 2006+A1
2. EN55014-2 : 1997+A1+A2
3. EN60335-1 : 2002+A1+A11+A12+A2+A13+A14+A15
4. EN60335-2-41 : 2003+A1+A2
5. EN61000-3-2 : 2006+A1+A2
6. EN61000-3-3 : 2008
7. EN55014-1
8. EN55014-2
9. EN61000-3-2
10. EN61000-3-3
Signature:
