Aquathin AquaKING RO, Owner'S Manual

Page: 16 / 52

16 © 2009 Aquathin Corporation. All rights reserved.
6 Black tubing to connect the drain saddle valve to the
drain line check valve on the right rear of the main
assembly frame.
6 Blue tubing for all purified water connections: main
assembly to DI module, DI module to tank, tank to GAC
Post-filter, and Post-filter to faucet.
NOTE: When cutting the poly tubing, DO NOT USE
SCISSORS. Use a razor knife with a fresh blade. Do not
crimp or collapse the tubing. Cut the tubing with a clean,
90° angle. This will allow the tubing to seat firmly into
the fittings, creating a secure and leak free connection.
Connecting Tubing to John Guest Speedfit®
Fittings
Aquathin systems make extensive use of John Guest
Speedfit® fittings. These high quality components
provide secure, leak free seals and make it easy to
connect and disconnect tubing without the use of tools.
Refer to diagrams on
page 47, Appendix C.
Connect Cold
Water Supply to
Feed Water Inlet
Measure and cut a
length of
yellow
yellow
tubing to connect the
feed water saddle
valve to the inlet on
the left side of the
frame assembly.
Connect the tubing
to the saddle valve
using the compression fittings provided.
(See Figure 11, and installation diagram on page 48.)
Figure 11, Connect tubing as diagrammed