AquaSure FORTITUDE PRO Series, Manual

Page: 14 / 20

Tel: 1-800-661-0680
11
AQUASURE USA .com
STEP 9. System Startup
WARNING!
Immediately shut off the main water supply valve if there are leaks. Check the
leak area and see if there’s a loose connection or if more Teflon tape is needed to prevent
leaks from happening.
CONGRATULATIONS!
Your system is ready to use. Please document the filter installation time and replace the filter in the
suggested replacement time.
1. Find the nearest water faucet and remove the aerator or grid
mesh on the faucet. Turn on the faucet before turning on the
main water line to allow water to flow through.
2. Place the Fortitude Pro Series on Fast Rinse setting.
3. Turn on the water and let it run for 10 minutes to release
any trapped air bubbles or carbon media if a carbon filter is
installed.
4. Check for leaks!
5. After 10 mins, turn off the water from the nearest water faucet
and reinstall the aerator or grid mesh back onto the faucet.