
aquascapeinc.com |
☎
CAN (866) 766-3426 |
☎
US (866) 877-6637
7
NOTE:
If using the Snorkel Vault and Centipede Modules, small cobbles will need to be backfilled around the excess
excavated perimeter of the filter in order to provide a sufficient base for the AquaBlox
®
to sit on.
STEP 8
INSTALL AQUABLOX
®
Install AquaBlox
®
in the storage basin, butting them tightly against each other. After placement of the tanks, bring the inner
geotextile (if using) up the sides of the tanks. For the Rainwater Harvesting Water Storage Kits please refer to the Rainwater
Harvesting Water Storage Kits diagram that is being installed for the proper tank configuration.
NOTE:
When stacking AquaBlox
®
only one panel “A” is required between the two joined AquaBlox
®
. See tank assembly
instructions for more detail.
Snorkel
®
Vault and Centipede
®