4
☎
US (866) 877-6637 |
☎
CAN (866) 766-3426 | aquascapeinc.com
SMALL AQUABLOX
®
The Small AquaBlox
®
is recommended in use with
Pondless
®
Waterfalls using the Pondless
®
Waterfall Vault
and also when constructing a wetland filter using the Large
Snorkel
®
Vault and Centipede
®
Module.
LARGE AQUABLOX
®
The Large AquaBlox
®
is recommended in use with
Pondless
®
Waterfalls and Rainwater Harvesting System
using the Large Snorkel
®
Vault and Half- or Large
Centipede
®
Module.
NOTE:
Be sure to check all pieces upon arrival for any damages that may have occured during shipping.
26.5"
16"
17.5"
26.5"
16"
9.5"
Load Bearing Top
Side
Load Bearing
Bottom
Small AquaBlox
®
Large AquaBlox
®
Side
Side
Tank Installation
STEP 1
EXCAVATE STORAGE BASIN
It is recommended to lay out the position of the Pondless
®
Waterfall Vault and AquaBlox
®
prior to excavation in order to
determine actual excavation dimensions.
NOTE:
An additional 6" of excavation is recommended per side of the basin to allow for AquaBlox
®
dimensions, sufficient
backfill material, and compaction required during backfilling.
See the diagrams below for examples of Pondless
®
Waterfall storage basin configurations. Larger storage basins can be
constructed by increasing the quantity of Small AquaBlox
®
and/or using the optional Snorkel Vault Extension in combination
with the Large AquaBlox
®
. Liner and geotextile dimensions will vary according to the quantity and size of AquaBlox
®
used.
NOTE:
Check for presence of high water table in the excavation, which must be kept at levels a minimum of 3 feet below
the bottom of the AquaBlox
®
structure at all times.