AQ1B Compact Underwater Metal Detector
User Manual
1.6
Make a note of the detection range on a suitable test object.
1.7
Leave the system operating and re-confirm the functionality and detection
range of the unit every 30 minutes - re-adjusting the tick-over as necessary.
1.8
When it becomes impossible to set the threshold, or the detection distance has
dropped dramatically, this can be considered to be the end of charge status for
the battery.
1.9
With a new battery pack, the operation time from a fully charged state should
be in the range of 8 to 10 hours. If the performance becomes unacceptable
after less than what you (the operator) determine to be an acceptable minimal
operational period, then the AQ1B-Compact Battery Pack needs to be
replaced.
Note: If your battery needs to be replaced please contact our technical support dept
to arrange for an installation of a replacement battery, or in the case of an
approved service agent please refer to the servicing data provided.
Please consider NiMH batteries as hazardous material and dispose of your old
battery pack in line with local guidelines.
14
