AQ1B Compact Underwater Metal Detector
User Manual
The
Aquapulse 1B-Compact
underwater metal detector is a precision built
instrument using the latest pulse induction techniques, and has been designed for both
ease and simplicity of use in the underwater environment, featuring good detection
performance for locating both ferrous and non-ferrous metals.
The unit is ruggedly built to withstand normal diving usage, but to get the best
trouble-free operation and long life, certain simple operation and maintenance
procedures must be followed. Read the instructions carefully before diving with your
detector.
Initial Testing of your AQ1B-Compact Detector:
1.
Charging the batteries: -
The AQ1B-Compact is supplied only partially charged and will require a full 14
hours charging duration to bring the unit to a fully charged status.
Make sure
the AQ1B-Compact switch is in the OFF
position. Plug the output lead from
the charger into the PHONE & CHARGE socket on the control bulkhead.
Please note that this can only be inserted one way round due to the locating
(polarising) pin. Screw down the retaining collar. This should be good finger
tightness only.
N.B. DO NOT ON ANY ACCOUNT PLUG THE CHARGER INTO THE LOOP
SOCKET AS DAMAGE MAY BE DONE TO THE ELECTRONICS
Ensure the charger is correctly connected to the Phone/Audio socket
before
plugging the charger into the mains supply (100 – 250vAC). After running for
an hour or so the charger may get slightly warm to the touch. This is quite
normal.
4
