3
1. Introduction
The Extra-Soft water purification unit (hereinafter referred to as the water purifier) was manufactured by Aquaboss Ltd. (Russia, St.
Petersburg).
The water purifier is designed for additional purification of drinking water from mechanical and colloidal particles, organic impurities, and
also eliminates excessive hardness, flavour, smell and colour of water in the municipal and local water networks (artesian wells, wells,
etc.), provided the requirements of this manual are met.
Water purifier materials are safe, non-toxic and do not release into water any matters, hazardous for human health and environment.
The water purifier meets the hygienic requirements and requirements of TU 3697009-50056997-2010.
1. Requirements for water supply
The water purifier is designed for post-treatment and water softening, corresponding to SanPiN (СанПиН) 2.1.4.1074-01. The
hardness of the water supplied should not exceed 10
°
F.
2. Specifications
3. Contents of delivery:
Attention! The water purifier is not intended for use at minus temperatures.
Overall dimensions (length x height x width):
271 x 495 x 190 mm
The pressure of the water supply system is not less than
0.1 MPa (1 at)
The pressure of water supply no more than
0.6 MPa (6 at)
Water temperature
+5 ... + 35 ° С
Maximum Performance
100 l/h
Minimum service life at water hardness 10
о
F
1.5 m
3
Weight, not more than
10 kg
No. Nomination
Quantity
1
Casing assembly (1)
1 piece
2
Modules (K5, K7):
2 pieces
3
Connecting pipes (p / m)
4
4
Tap 1/4 "
1 piece
5
Service plug
1 piece
