VCS - Viscomaster™
43
Procedure
Post requisites
To clear A010, A011, A012, A013 alerts, you must correct the problem, acknowledge the alert, then repeat the
calibration.
To clear A001, A002, A029, A031 alerts, you must correct the problem, acknowledge the alert, then power-
cycle the transmitter.
For all other alerts:
If the alert is inactive when it is acknowledged, it will be removed from the list.
If the alert is active when it is acknowledged, it will be removed from the list when the alert condition clears.
Table 5-1: Status alerts and Status Alert Severity
Alert number
Alert title
Default
severity
User can reset
severity
A001
EEPROM Error
Fault
No
A002
RAM Error
Fault
No
A003
No Sensor Response
Fault
Yes
A004
Temperature Overrange
Fault
No
A006
Characterization Required
Fault
Yes
Summary of Contents for Viscomaster
