Quartz Digital exposed with adjustable head
installation instructions
Page 9
6
Attach the supply pipes to the Digital processor,
ensuring that the cold and hot feeds are fitted
into the appropriately marked inlets.
DO NOT SOLDER NEAR TO PLASTIC
COMPONENTS.
!
Drill a hole through the ceiling, a minimum of Ø30mm, maximum Ø40mm.
8
Feed the riser rail assembly containing the
supply pipe and data cable through the hole in
the ceiling, ensuring that the control is at the
desired height, the rail is vertical, and that there
is adequate working clearance above the top of
the rail in the roof space.
9
Temporarily slide the gel hook up the rail ensuring it is positioned higher than
the lower fixing bracket assembly.
10
Locate a suitable entry point into the ceiling for the riser rail, avoiding joists
and services.
7
The centre of the riser rail stands 45mm from the wall. If this is not suitable, the
spacers provided with the fixing brackets will increase the depth to 70mm from
the wall.
!
Place the lower bracket support pillar into
position ensuring the locking lug is correctly
fitted into the location hole.
11
