Axis Digital concealed
installation instuctions
page 9
Adjustable height head
The adjustable height head is supplied with masonry fixings
intended for use with a wall of solid construction only. If the
unit is to be installed on a wall of different construction then
please use alternative fixings as required.
!
Prepare pipe work from the
shower valve/processor to the
required position for the hose
outlet using ø15mm copper
pipe. Slide the 15mm gripper
ring down the projecting pipe
up to the wall face.
1
Trim the projecting pipe to a length of 15-22mm measured
from the wall face using a rotary type cutter. If a hacksaw is
used the pipe end must be carefully de-burred and
chamfered.
2
Remove the cover plate
from the main assembly by
removing the screw at the
base of the plate.
3
Clean and lubricate the pipe using a suitable (silicone based)
lubricant.
4
Carefully slide the wall fixing plate onto the projecting pipe,
turn to the required position and mark the screw holes on the
wall face. Remove the wall fixing plate and drill and
prepare suitable wall fixings.
5
Carefully refit the fixing plate
and secure it to the wall using
the screws provided if suitable.
6
Refit the cover plate.
7
