Axis Digital concealed
installation instuctions
page 8
Connect the power lead to a 3 amp fused
switched spur. Ensure that this is in an
accessible location and not in the bathroom.
The fused spur must provide a contact
separation of at least 3mm from the supply
in all poles (Live and Neutral).
13
THIS APPLIANCE MUST BE EARTHED
The data cable and power lead can be routed in the grooves provided under
the processor. They should also be clipped in place with ‘P’ clips or similar to
avoid accidents.
!
Run the shower at maximum temperature
(factory pre-set). If the temperature needs
regulating, then adjust the setting using a
small screwdriver under the black protective
flap on the Digital processor in dry
surroundings. Take care not to over turn the
adjuster.
14
Site conditions can affect temperature settings, installer to adjust as required.
ALL COPPER PIPE WORK MUST BE CROSS-BONDED AND CONNECTED TO A
RELIABLE EARTHING POINT
!