17
Aqualisa bar valve commissioning
THE AQUALISA BAR VALVE IS PRE-SET TO A SAFE MAXIMUM SHOWER TEMPERATURE. SHOULD IT BE NECESSARY
TO RESET THE MAXIMUM TEMPERATURE POSITION, PLEASE OBSERVE THE FOLLOWING PROCEDURE.
WE RECOMMEND THE MAXIMUM OUTLET TEMPERATURE IS SET TO 46
o
C.
1
Ensure that the hot water system is at normal maximum temperature.
! Should unacceptable damage to the temperature knob end cap occur when removing it from the temperature knob, please
contact Aqualisa Customer service on 01959 560010 to arrange a replacement.
2
Turn the temperature control knob to the mid-blend position (with the button at the top of the knob).
3
Carefully remove the end cover cap using a small flat bladed screwdriver if necessary.
4
Remove the central fixing screw, pull the knob clear and set aside.
5
Turn the valve on.
6
Using a digital thermometer adjust the temperature control to the required MAXIMUM temperature setting by turning
the brass spline.
We recommend the MAXIMUM outlet temperature is set to 46
o
C.
7
Turn the valve off.
8
Ensuring the temperature override button is pushed in, place the knob onto the valve ensuring the MAX temp position is
aligned with the temperature setting indicator.
!
9
Secure the knob to the valve and refit the knob insert.
AQ100 AQ75:Midas 8/9/15 13:54 Page 17
