AQUALEAK EMS-10X, Instruction Manual

Page: 48 / 53

Environmental Monitoring System (EMS-5X, 10X and OS) Instruction Manual
48
A. Acknowledge Alarms
Engineers may acknowledge all
alarms at the same time.
Users must acknowledge each alarm
individually.
Figure 38: EMS Alarms Screen with Selected Alarm and Acknowledge Button
Acknowledge all alarms at once as an engineer as follows:
1.
Open the Alarms screen (i.e. if on a
different screen).
2.
Tap the ‘ Acknowledge All (Engineers Pin) ’
button. A numeric keypad for the engineer
PIN will display ( Figure 38 ).
3.
Enter an engineer PIN (default: 1234 ;
see 4.2.3 User PIN Types and Numbers to
configure PIN Numbers to any 4-digit code).
4.
All Alarms will be acknowledged and turn to
green on the list.
5.
Tap the ‘ Refresh Alarm List ’ button to
clear all acknowledged alarms on the list.
6.
Once complete, tap the ‘ Back ’ button to
return to the Summary screen .
Acknowledge individual alarms as a user as follows:
1.
Open the Alarms screen (i.e. if on a
different screen).
2.
Tap an Alarm listed to acknowledge it. Its
text colour will change from black to blue .
A green ‘ Acknowledge ’ button will also
appear (bottom centre-left; Figure 38 ).
3.
Tap the ‘ Acknowledge ’ button. A numeric
keypad for the user PIN will display.
4.
Enter a user PIN Number (default: 0000 ;
see 4.2.3 User PIN Types and Numbers to
configure PIN Numbers to any 4-digit code).
5.
The selected Alarm will be acknowledged
and turn green on the list. The
‘ Acknowledge’ button will also disappear.
6.
Tap the ‘ Refresh Alarm List’ button to
clear the acknowledged Alarm form the list.
7.
Once complete, tap the ‘ Back ’ button to
return to the Summary screen.
Selected Alarm
Acknowledge
Button