9
How to charge your Aquajoy Saver Hand Control
For safety reasons, please ensure that you do not charge your
battery hand control in your bathroom.
Connect the battery hand control cable to the charger cable by matching connections
together.
Insert the charger plug into the mains.
Please leave your battery hand control on charge for approximately
12 hours
when
you first receive your bathlift.
When charging the hand control the
Amber light
will be seen.
When the hand control is not in use on the bath lift, please leave it on charge
continuously. You can not overcharge the battery hand control.
Charging the battery hand control continuously uses as little as 0.1 kwh per day
using very minimal consumption.
When connected to the bathlift there shouldn’t be any light on the hand control.
If the LED indicator light shows
Red
when connected to the bathlift then you do not
have sufficient battery charge. Please recharge your hand control.
When using the hand control please press the up or down button continuously to
raise and lower the bathlift.
Indicator Light Should
Remain
AMBER
when the
Hand Control is charging
Match the hand control
connector and the charger
connector together
