21
TO FIT & REMOVE THE WING SUPPORTS ON THE BACKREST
Simply locate the guides on the wings into the location points on either side of the backrest.
Simply lift upwards from the location points and the wing supports will release.
TO FIT THE CHEST & LAP HARNESS
The chest harness fixing bracket should be attached to the back of the backrest on the inside
section of the backrest bracket. It is adjustable by sliding the bracket up and down the backrest
so that the belt can be positioned at the most suitable height for the client. The harness is
secured by screwing the knob into the fixing bracket as shown in the attached diagram. (The
short part of the two piece chest harness should be attached to the side where the client is
transferring for easy, quick release). The chest harness size is adjustable from the side by pulling
the material through the buckle (as with a belt). To secure the user, simply insert the chest
harness clip into the buckle.
