8
How to remove your AquaJoy SAVER Bathlift
Empty the water from the bath.
Press and hold the Down button to lower the bathlift to its lowest position (
Fig 4
)
DISCONNECT THE HAND CONTROL!
Fold the side flaps onto the seat (
Fig 5
)
Lift the seat section up, continue to lift the bathlift seat section until it is clear of the
bathlift base. (
Fig 6
)
To remove the base, lift the suction release bar at the back of the bathlift base (
Fig 7
) then
tilt the base forward.
This will release the front suction cups and the base section can be lifted from the bath.
PLEASE
NOTE
: DO NOT use the suction release handle to lift the bathlift. Once the rear suction
cups are released simply lift the bathlift base out of the bath.
PLEASE NOTE: PLEASE ALWAYS ENSURE THE BLUE ACTUATOR LATCH & BLUE BRACKET ARE
ALWAYS FULLY ENGAGED / PRESSED IN PLACE / PIN IN PLACE.
Fig 4
Fig 5
Fig 6
Fig 7
