Aquafilter Clear Choice, Installation Manual

Page: 12 / 36

O
Turn the cartridge by 90 counter clockwise then delicately pull
down.
Disconnect the tubing from the section installed within the lower
part of the osmotic housing.
In order to achieve the above:
1. Take out the protective safety clip
2. Apply symmetric pressure onto the flange of the connecting
section and pull out the tubing.
WARNING! During the process of the replacement of filters
apply due care to make sure that the tubings do not become
damaged!
Take out the new cartridge from the film, next install the cartridge
inside the head, in the direction of the arrow which determines the
direction of water flow.
1. Place the cartridge inside the head.
O
2. Turn the cartridge clockwise by 90 .
WARNING! Prior the installation of the cartridge, make sure
to apply white cosmetic wax onto the o-ring.
WARNING! Make sure that the cartridge has been correctly
installed.
Replace the remaining cartridges as well as the capillary
membrane which is found inside the
EXCITO-WAVE system with
the application of an analogical manner.
Assemble the front panel.
WARNING! During the process of the replacement of filters
apply due care to make sure that the tubings do not become
damaged!
Take off the front panel of the device in a delicate manner.
Take off the front panel of the device in a delicate manner.
19. Replacement of cartridges within the systems of EXCITO-WAVE and EXCITO-OSSMO
20. The replacement of the osmotic membrane within the system of EXCITO-OSSMO
WARNING! Following each and every replacement of
cartridges and the membrane, execute the washing
procedure (see point number 16). Following the completion
of the aforementioned activities the filtered water is ready to
be consumed.
11