Aquafilter Clear Choice Installation Manual Download Page 10

1)

  Drill an opening of the diameter amounting to 12mm within the nozzle of the sink

(in the case of enamelled sinks, the manufacturer recommends for the drilling of 
openings within the sink supporting, structure) or within the kitchen table-top.

2) 

Upon the threaded end of the nozzle [1] affix the metal pad [2] and then a rubber
gasket [3].

3) 

Affix the faucet within the prior drilled opening.

4) 

From underneath the table top assemble the pad upon the ssafety clipdle [4], [5] 

(made of rubber), [6] (made of metal) and tighten with a nut [7].

The system of EXCITO-WAVE and EXCITO-OSSMO

6) Assemble the water supply tubing and which connects the nozzle with the system:

- upon the end of the tubing which goes out of the port [OUT] and assemble [11] a
metal nut, [10] and a plastic clamp ring [9],

press a pad into the insides of the tubing [8],

enter the tubing (until it stops) into the insides of the faucet and tighten it 

(manually!) with the application of the nut which had been cartridgeed upon the 
tubing.

15

Installation of the FXFCH17-C faucet

16

 Washing of systems

1

2

3

4

5

6

7

8

9

10

11

Fig. 1 The assembly of the faucet

upon the kitchen table top

Following the finished phase of installation, the washing process 
is to be executed In order to achieve the above:
1. Unscrew the faucet cork.
2. Wait 5 minutes until the water washes the cartridges.
Following the finished phase of washing the filtered water is ready 
to be consumed.

WARNING! In the situation of the occurrence of, for instance, 
white  colour  of  water,  make  sure  to  repeat  the  process  of 
washing of water. The system is to be washed until the effect 
of crystal clear water is achieved.

The systems of EXCITO-WAVE.

Following the completed installation phase, make sure to execute 
the phase of washing. In order to achieve the above:
1. Unscrew the faucet cork.
2.  Wait 60 minutes until the water fills the tank.
3. Open the cork of the nozzle, then empty the whole contents of  
    the tank. 

DO NOT CONSUME THIS BATCH OF WATER.

The  aforementioned  procedure  is  to  be  executed  three 
times. Following the completed washing phase it is possible 
to consume filtered water.

The system of EXCITO-OSSMO

1

2

35

40

45

50

10

15

20

25

30

5

55

60

min

35

40

45

50

10

15

20

25

30

5

55

60

min

9

Summary of Contents for Clear Choice





































Reviews: