Aquacontrol DOS CL 2 Deluxe WIFI Salz, Manual

Page: 35 / 179

34
Multiple errors will be alternated on the display.
The dosing is automatically continued by Flow and Level after the elimination
of any problems.
The resetting of the Limit error message is carried out using the OK button.
The switch-on delay follows. This may also be cancelled using OK .

! – Additional display in temperature range with temperatures < 5°C

Min. alarm and Max. alarm for pH and Redox
see section 4.4 + 4.5 for pH and 5.4 + 5.5 for Redox
3 Menu mode/changing parameters
Stop
control
unit
Manual
control
System
settings
Control
unit pH
Control
unit
disinfection
Test mode
WLAN
set-up
Factory
Settings
Calibration
Testing of
probe
Pump pH
Web set-up
mode
Date Set point
7,2
Set point
650 mV
Pump
disinfection
Manual set-
up
Time P-band
-1
P-band
100 mV
Alarm relay IP address
Language Min. alarm
6,8
Min. alarm
550 mV
Level of pH WLAN SSID
Configuration Max. alarm
7,6
Max. alarm
750 mV
Level of
disinfection
WLAN
password
IDS 2
Reset time
0
Reset time
0
Flow sensor
MAC
address
Delay
8 min
Hold-back time
0
Hold-back-time
0
Flow rate
Limit pH
120 min
Min. degree
15 %
Min. degree
10 %
Input pH
Limit
Disinfection
120 min
Max. degree
100 %
Max. degree
100 %
Input Redox
Input temp.
Input Cl
CLE 3
Input Cl
CLB 3