Page - 12
3 - Configuration
3.1 Create a Group
EXAMPLES OF GROUPS THAT CAN BE CREATED:
o
Backyard Lights Group
o
A pool light and a spa light that have been connected and configured by the heat pump
installer can be activated upon demand.
o
Cold Plunge Group -
o
A spa can be set to "COOL" to a desired temperature upon demand.
o
Custom Group -
o
A custom group can be created that heats the water to a desired temperature without
effecting another user's settings.
The example below shows a "BACKYARD LIGHTS" group being created manually.
Two devices will be set to an operating state of "ON" when the group is active.
l
A pool light relay
l
A spa light relay
PLEASE NOTE
This section only describes the
configuration of an already connected relay
device. To physically wire these types of
devices to the heat pump, see the heat
pump's installation manual.
Enter "Groups" menus, then proceed
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
A
PRESS "MENU"
BUTTON
B
USE ARROWS TO
"GROUPS"
C
PRESS "ENTER"
1
USE ARROWS TO
"NEW GROUP SETUP"
2
ENTER TO CREATE
3
USE ARROWS TO NAME
"BACKYARD LIGHTS"
4
ENTER TO SAVE
5
USE ARROWS TO SET
MAXIMUM ACTIVE TIME
