Page - 8
Pool Only, No Valves, Hayward VSS
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
A Hayward variable speed circulation
pump is configured.
l
A pool schedule is configured (Everyday
from 8:00 am to 6:00 pm)
When pressed, the "Pool/Spa" button will display with two choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Schedules
Pool Only, No Valves, Jandy VS
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
A Jandy variable speed circulation pump is
configured.
l
A pool schedule is configured (Everyday
from 8:00 am to 6:00 pm)
When pressed, the "Pool/Spa" button will display with two choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Schedules
Pool Only, No Valves, Single Speed
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
A single speed circulation pump is
configured to use the relay "A" connection
point on the expansion board.
l
A pool schedule is configured (Everyday
from 8:00 am to 6:00 pm)
When pressed, the "Pool/Spa" button will display with two choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Schedules
