Aquacal Leisure Temp LT1000, Installation Manual

Page: 6 / 72

Page - 3
1 - Installation
WARNING
Failure to heed the following may result in injury or death.
l
Installation of this equipment by anyone other than a qualified installer can result in a safety hazard.
l
The information contained throughout the "Installation" section is intended for use by qualified installation
technicians familiar with the swimming Pool/Spa safety standards.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Failure to protect equipment against corrosive conditions will adversely affect the life of the equipment and will
void equipment warranty.
IN THIS SECTION:
1.1 Positioning Equipment 4
1.2 Clearances 5
1.3 Dimensions 6
1.4 Plumbing 8
1.4.a Plumbing Requirements 8
1.4.b Plumbing Diagrams 9
1.4.c Water Connections to Heat Pump 11
1.4.d In-Line Chlorine Feeders 13
1.4.e Water Flow Rates 13
1.4.f Adjusting Water Flow Using ΔT (Delta-T) 15
1.4.g Maintaining Ability to Winterize 16
1.4.h Adjusting Water Pressure Switch 16
1.5 Electrical 17
1.5.a Electrical Requirements 17
1.5.b Incoming Power Access Holes 19
1.5.c Access Panels 20
1.5.d Verifying Transformer Setting 21
1.5.e Schematic Location 21
1.6 External Equipment 22
1.6.a Connecting a Call Flex 22
1.6.b Connecting External Controllers to Heat Pump 24
1.6.c Connecting Gas Backup Heater to Heat Pump 31
1.6.d Connecting Multiple Heat Pumps (Master / Slaved) 36
1.6.e Connecting a Pool/Spa Switching Relay 41
1.7 Program Heat Pump for the Customer 44
1.7.a Setting Date and Time 44
1.7.b Setting Time and Date Format 45
1.7.c Selecting Celsius or Fahrenheit 48
1.7.d Setting Entry Code Option 49
1.7.e Using Entry Code to Access Heat Pump 51
1.7.f Resetting Factory Defaults 51
1.8 Cleaning Equipment After Installation 53
1
-
Ins
ta
ll
at
ion