5
QUICK START INSTRUCTIONS
SETTING.UP.YOUR.NEW.ROBOTIC.POOL.CLEANER.IS.AS.EASY.AS.1,.2,.3!
WARNING: The Power Supply must be placed at least 12 feet / 4 meters from the pool’s edge!
Power Supply
GFCI / RCD
outlet
Floating
Cable
Figure 5c
WARNING: A Ground Fault Circuit Interrupter (GFCI) / Residual Current Device (R.C.D.) must be installed to
protect your electric outlet and to prevent any possible electrical shock!
TIP!
To help protect your Floating Cable from potentially getting wrapped around your cleaner’s brushes, it is suggested to
turn off your pool’s filtration system while your cleaner is in operation.
NOTE: It is suggested to unplug the Power Supply when the
cleaner is not in use.
Power Supply
Floating Cable
12’ / 4m
from pool’s edge
Make sure that the Power
Supply is positioned at the
center of the long side of the
pool that that the cleaner enters
at the pool at its midpoint.
Figure 5b
Figure 5a
Press the Switch to ON to start your cleaner.
