6
Innovative purification solutions
www.aquablu.com
1.2 AQUABLU PRO WATER PURIFICATION UNIT
Fig. 2: Purification unit
The purification unit is housed in a stainless steel frame, enclosed by a plastic cover.
The cover must not be removed, other than by an authorised Aquablu dealer.
Unauthorized removal makes any warranty void.
On the left hand side (LH) of the unit are the master switch, status light and the mode button
located. Below that the serial number tag is placed, just above the water connections.
The front of the unit facilitates in the left upper corner the NFC contact area.
On the right hand side (RH) of the unit the two white covers of the membrane chamber are
presented. At the bottom of the system there is an air inlet that must have a free space 10cm to
take in air and for maintenance. All control and the central processing equipment is contained
inside the enclosure.
SERIAL NUMBER TAG (UNIT ID)
Each system can be identified by means of a Unit ID (serial number) which can be found by
making contact with NFC using your Aquablu phone app. If no phone is near you the serial
number tag can be found at the bottom of the system. See Fig. 3 for the appearance of the tag.
Always include the Unit ID of the unit
in all communication with your dealer
or Aquablu service department when
requesting support or spare parts.
When requesting support for a
technical issue, make sure the trouble
shooting procedure in de
Aquablu app has been consulted and
followed first.
Fig. 3: Aquablu unit ID
