3.
DAC Configuration
Digital to analog conversion board is modular.
The S3 version implements a R2R resistor ladder network D/A conversion-based. High
performance proprietary FPGA-based digital decoding without digital filter
More info at
www.aquahifi.com
.
4.
Front panel
On the front panel, you will find:
●
power on/off switch
●
rotary switch for selection of the digital input
●
PHASE ( 0 / 180 ) switch
●
LED power indicator
5.
Back panel
On the rear panel, you will find:
●
IEC connector of the power supply (220-240V or 100-120V).
●
Digital inputs :
- RJ45 AQlink (I2S serial bus) - 24 bit / 384 kHz
- BNC coax (S/PDIF) 75 ohm - 24 bit / 192 kHz
- USB port - 24 bit / 384 kHz – DSD128
MODULAR INPUT
upgradable, options:
AES/EBU balanced 110 ohm - 24 bit / 192 kHz
RCA coax (S/PDIF) 75 ohm - 24 bit / 192 kHz
AT&T (ST Fiber) - 24 bit / 192 kHz
Optical TOSLINK - 24 bit / 96 kHz
●
The TX LED which indicates the timing of the digital signal S/PDIF / AES/EBU
●
analog outputs :
- RCA single-ended
- XLR balanced
